Ultima Lightsource
High performance metal halide light source for ultimate brightness.
These light sources can supplied as white light only or with colour change. See below to specify the model you require.
The Ultima can only be used with GLASS FIBRE ONLY.
Please note: All fibre optic light sources require free ventilation.
Information
Lamp type: Philips 250/2 MSD
Colour temperature: 8500k
Lamp base: GY9.5
Gear: Magnetic
Lamp Life: c. 3000 hours
Operating Voltage: 230v AC
Warm Up Time: 1 minute
Fan Type: Crossflow
Common End Size: 30mm diameter
Enclosure: Green, sheet steel
Dimensions (mm): 364(L) x 259(W) x 162(H)
Weight: 9.5kg
Certfication: CE
RPM / Colour Duration calculator
The table below shows how long the light of each colour will be seen, depending on the number of segments in the colour wheel and the speed of the motor specified.
| RPM | 2 Segment Colour Wheel | 3 Segment Colour Wheel | 4 Segment Colour Wheel | 6 Segment Colour Wheel |
|---|---|---|---|---|
| 0.5 | 60 seconds | 40 seconds | 30 seconds | 20 seconds |
| 1.0 | 30 seconds | 20 seconds | 15 seconds | 10 seconds |
| 2.5 | 12 seconds | 8 seconds | 6 seconds | 4 seconds |
| 3.0 | 10 seconds | 7 seconds | 5 seconds | 3.5 seconds |
Wheel Colours
| Dichroic Wheel Colours | AVR Wheel Colours |
|---|---|
|
The standard dichroic colour wheel supplied with this light source comes with six colours. These are: Clear Blue Purple Orange Green Yellow |
Alternatively, for an additional cost the light source can be configured for AVR control. The AVR colour wheel has seven colours.These are: Orange Light Blue Pink Deep Blue Green Yellow Clear |
Other colour options
We can provide light sources configured with our unique Varicolour colour wheels.
Alternatively, we can ‘sandwich’ a colour wheel and a modified twinkle wheel together giving the light output the properties of both in a single wheel.
Wheel Control Options explained
Continuous - the colourwheel can not be stopped.
Switch - A switch is fitted on the light source allowing the motor to be switched on or off.
Separate Feed - A separate mains power feed is fitted allowing the motor to be wired through a light switch for remote operation.
Ordering options
This lightsource is available in a number of configurations. To specify your exact requirement, please use the lightsource configuration tool below to select the options you require. The proper part number will then be produced below when you click on the ‘update’ button. This page can then be printed for reference.
Current configuration Part number
UA G - 250 - E - MSD - W - X - M - XX - XX - X
Product Data Sheet
Download Product data sheet in PDF format
User Manual
Download User Manual in PDF format
